Program Loader Monitor
Program Loader Monitor Download & installation instructions.
The Program Loader Monitor is used to download programs to the DVC5 and DVC10 and to display information from all of the DVC modules connected together via the CAN Bus. It runs on your Windows PC and uses a RS232 cable to communicate with the DVC5 and DVC10. Data from a DVC expansion module (i.e. DVC21, DVC70 etc.) is transmitted through the DVC10 to the Program Loader Monitor. The Program Loader Monitor can also be used to program some DVC expansion modules directly.
The Program Loader Monitor is used to gather DVC5, DVC7 or DVC10 I/O information along with the names/labels assigned to them in the Programming Tool. The runtime graph is used to plot any two variables as fast as the computer can collect data from the DVC5, DVC7 & DVC10.
When selected, the Program Loader button sends a signal in the serial cable that allows theDVC5, DVC7 or DVC10 to go into programming mode on power up.
You may download a free copy of the Program Loader Monitor for your use.
System Requirements:
Download Size: 136 Mb
OS: Windows 2000/ XP Proffessional
PC with Serial Port - RS232 or USB port. For USB ports you need a USB to RS232 converter (i.e. Dongle)
Communication: RS-232 Serial cable P/N: 999-10075
Download & installation instructions:
1. Click to
2. Save the zip file to a temporary file location on your computer.
3. Unzip ("Extract All") the files to your temporary location.
4. Run the SETUP.EXE file, and click Finish to complete the installation.
5. The Program Loader Monitor installs the files needed to run the Loader monitor by itself.