Products

HIGH COUNTRY TEK - PLD, Powerline / universal single / dual coil PWM Valve Driver

The PowerLine (PLD) module is ideally suited for today's hydraulic OEM, distributor or system builder. With both mechanical and electrical robustness paramount in the design priority, Windows™ compatible easy to use set-up software and full CE compliance means this one product can through the many configurations and features available, be used across multiple platforms, markets and applications.

PLD Product Features:

  • Pre-written Graphical User Interfaces for all modules
  • Uni or bi-directional open loop pump stroker or valve controller
  • Anti-stall option with auto - reverse feature
  • +5V ref @ 5mA for local command joysticks, potentiometers etc
  • Accepts all common analog command signals
  • Sealed and protected to >IP68 ( NEMA 6P )
  • Unique 'Solid' potting with flame retardant materials

The PowerLine has five (5) basic Configurable modes of operation available within the one module:

  • Manual - Control of the output current through the graphical user interface
  • Horse Power Limiter & Anti-Stall – Automotive style prime mover protection
  • Horse Power Limiter & Anti-Stall with Reverse – Ideal for system such as auto-feed wood chippers or any applications that need a reverse feature if the engine starts to stall because of a forced load
  • Horse Power Limiter & Anti-Stall with Max Command - Used to protect an engine from stalling, effectively de-coupling the load from the motor
  • Valve Driver – Direct open loop control of single or dual coil valves or pump controls

Item PLD Series Description
Function Multi Function Digital Valve Driver General purpose Single or Dual coil open loop PWM valve driver
Number of Coils 1 Single or Dual 0 to 3.0 Amps - See Cut Sheet
Control Input Voltage or Current 0-5V, 0-10V, 4-20mA & 12±8mA
Connector Terminal Strip Optional Weatherpack on 6" leads
"Q" Option Mating Connector Kit Mate for P1: 999-10159
Mate for J1: 999-10160
6 way tower and 6 way shroud on 6 inch cables will be provided
Graphical User Interface (GUI) P/N: 023-00206 Set-up & Diagnostic software
Feedback Input Pulse only - software selectable 0 to ±1V, 0 to 1.25V, 0 to 2.5V, 0 to 5V & 0 to 10V
Ref Output Yes and comes with 10K Pot & Knob +5V @ 5mA ( current limited 1KΩ )
Physical 94L x 94W x 10H mm 3 x # 8 Mounting screws
Mobile Equipment IP68 (Module only) - derated for connector as required Solid potted
Temperature ºC -40 to +85 Deg. C Operating
Voltage 10 to 32 VDC Reverse polarity protection and transient protection