Power-Line, the universal single or dual coil PWM driver to stock for your open loop amplifier, electronic HP limiter and closed loop speed control applications.

 

FEATURES:

Inputs:

● Pulse input with a minimum impedance of 100K ohms

● Enable In - Digital input to turn unit OFF or ON

● Direction In - Digital input to select which coil to drive

● Command In - Analog voltage input to be used with a 10K Ohm pot, accepts 0 to 5 VDC or 0 to 10 VDC or Pulse.

Outputs:

● Single (software selectable) or Dual proportional output

● Regulated 5 Vdc command pot reference voltage

Current Capabilities:

● Current ranges include maximum values of  3.0 Amps

● Optimized current ranges for two EDC valves in series or a single EDC valve

Setup and Installation:

● Interconnect is through a 12-position terminal strip that will accept up to 12 AWG wire

Diagnostic onboard LED’s:

● PWM% LED is provided for each valve coil

● Error LED flashes for any detected error

● PWR OK LED indicates correct power levels

 

User settings and adjustments to the regulation process are made via a computer through the Serial Communications System.