DVC Product Configuratior
Instructions
-
Click here to open a file as an Excel spread sheet in a separate window.
-
Complete the I/O Qty Req'd column to display the HCT product that will support your needs.
-
When you have finished filling in the I/O Qty Req'd column, the No. DVC Modules Required column gives the options for the DVC modules required. You will always need a DVC5 or DVC10 as the master controller. For example; if the PWM Outputs indicates you'll need a DVC5 or DVC10 and the Universal / Pulse Inputs indicates you'll need a DVC10, then the DVC10 is the lowest common denominator, and thus a DVC10 is required. Each of the I/O requirements are independent functions in the DVC product, so you don't add up the DVC10's (or expansion modules) on each line.
-
When you're done filling in the requirements, the spreadsheet should look something like the example below.
For Example: The lowest common denominator is a DVC10 +DVC21 or DVC22 or DVC50.
Input/Output Requirements
I/O Qty Req'd
No. DVC Modules Required
Specifications
High-Side Outputs
3
DVC5 or DVC10
0 - 3.0A
PWM Outputs
3
2 DVC5's or DVC10
0 - 3.0A
Analog Inputs
2
DVC5 or DVC10
0 to 5 VDC
Universal/ Pulse Inputs
1
DVC10
Analog or Pulse Input with input electrical selections of:
-1v to 1v, 0v to 5v, 0v to 10v, and 0ma to 20ma
Digital Inputs
16
3 DVC5's or a DVC10 + DVC21 or DVC22 or DVC50
On / Off Inputs: Sinking; 3 - 32 VDC
-
You can have up to 16 expansion modules in a DVC10 configuration. For additional configurations, contact your local Distributor or HCT.